Pole Line Hardware copper bonded earthing rods , 0.254mm lightning
grounding rod Copper Coating
|Length of supply(mm)|
We can supply Copper Clad Steel Earthing Rod in all sizes and
1) Ground Rod can be made double heads thread, thread can be packed
by plastic sheath
2) One end is pointed and the other end is threaded for extend
3) One end is pointed and the other end is flat.
*Special sizes and shapes and copper thickness can be customised
according to your demands if
you can't find the specification you need in the above table.
- Thickness of the copper layer is more than 0.254mm(all can be done
to your demand)
- The core steel rod shall have a tensile strength of not less than
- The steel core is low carbon steel, and the carbon content is about
- The purity of the copper using as cladding shall be 99.9% pure
- The Ground Rod will be capable of being through 90 at a maximum
- if 100mm with no copper fracture and with no ill effect on the bond
- between the steel and the copper cladding.
- Good in anticorrosion that usagelife is more than 50 years or more,
- constant low resistance and good plasticity which had the
characteristics of copper as well as steel.